• Compatible with Trek bikes equipped with integrated direct mount chainstays • Will not interfere with pedaling • Super strong and stable platform will hold your bike upright even with gear on the rack
- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate…
Shimano's SLX Disc Brakes are strong, powerful, and easily modulated. SLX post-mount calipers use two oversize ceramic pistons for impressive power that's easy to roll on and off. Ceramic pistons and finned ICE-Tech pads prevent heat buildup so you get consistent braking with no fade, even on long…
- Fixed position wear-plates for 32t specific capacity and no-hassle setup - Adjustable angle lower backplate arm accommodates all chainstay designs - Tech 3 Stealth Idler pulley features custom Enduro bearing for smooth and quiet operation - Includes new Turbocharger Bashguard - BB adapter plate…
Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
- Dispenser of rubber cable O's
- For chain and derailleur alignment - 20 per bag
M7 Shaft/M6 Head 48mm Long
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
- Aheadset preload adjusting bolt
• Designed to keep dust and dirt out of V-Brake cable/housing systems
- HFX-9 kit includes a pre-crimped inline caliper fitting - Sole and Stroker Ryde kit includes specific fittings for lever and caliper
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano,…
• Specially-formulated plastic liner prevents brittleness • SLR/M housing compatible • Plastic
Greenfield's Rubber Foot attaches to the bottom of the kickstand for added support on soft and slippery surfaces. It also prevents the kickstand from scratching your flooring. The Rubber Foot fits all Greenfield kickstands and many others, too.
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
- Sunlite Cottered Pins
- For MTB levers - 7mm x 1mm - Aluminum construction
- Aluminum straddle cable carrier for cantilever brake
Standard replacement star nuts for threadless steerers.
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
- Upgrade any bike with o-ring sealed aluminum ferrules to prevent contamination
• Custom colors used on project one bikes • Specially-formulated plastic inner line prevents brittleness • SLR/M housing compatible • Plastic
Bar end plugs (2)
• Compatible with Shimano, SRAM, and Campagnolo systems • Smooth surface reduces friction and improves performance • Black Teflon cables are designed for ultra-low friction and corrosion-free shifts • Stainless steel and zinc galvanized steel cables are corrosion resistant
A must-have item for all your delicate department store bike repairs.
Greenfield's RetroKit is used to mount Greenfield kickstands (sold separately) on bicycles that require this special piece due to cables being in the way or an unusual frame design. If you have any questions about using the RetroKit, please contact us.
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is…